With the arrival of optical fiber to the home and 5G, optical fiber fusion splicers commonly used in infrastructure construction have become more and more widely used. The following are precautions.
1. The input voltage of optical fiber fusion splicers at home and abroad is regulated. Please do not use a voltage that does not comply with the regulations. This will damage the battery of the fusion splicer or cause a fire.The AC power supply voltage at home and abroad is basically 100-240V.
2. Use a socket with a ground wire when charging to avoid electric shock.
3. Do not put liquid or other substances into the machine. If water or substances enter the machine, you should cut off the power or unplug the battery in time, use a hair dryer to dry it and turn it on. If there is If there is a problem, do not disassemble the machine without permission and send it for repair in time.
4. The welding process of the welding machine will cause arc discharge, so do not use it near flammable gases.
5. Please do not touch the heating tank with your hands. You should use the matching clip. When replacing the electrode rod, you should also turn off the power to avoid burns and electric injuries.
6. If the machine smokes or breaks down, it should be sent for repair in time.
7. Each fusion splicer is equipped with a dedicated charger. Do not use other adapters. Charging with other chargers will cause excessive current or overcharging, resulting in battery leakage. liquid, heat, rupture and other dangers.
8. The battery cannot be modified or disassembled.
Charge according to the specified time, and stop charging when it is fully charged. If you feel that the battery or charger is abnormally hot or has other abnormalities during charging, please stop charging.
Do not use the battery if it is leaking, discolored, deformed, hot or otherwise abnormal.
9. When using the fusion splicer, you should cover it with a windproof cover and avoid dusty places.
10. Put the alcohol in an alcohol bottle and dispose of it when appropriate.
11. The cleaning machine should be cleaned with alcohol. Do not use too much alcohol on the alcohol cotton for each cleaning, and do not use other chemicals for cleaning.
12. The fusion splicer is equipped with a special storage box, which can prevent impact and play a protective role.
13. Be careful not to drop the optical fiber fusion splicer when it is in operation or not in use. This may cause damage to the machine or poor splicing quality.
